Quality claims should come with test conditions.
Samiktech combines internal process control with defined third-party certification and testing. Every claim is tied to a configuration, sample and standard scope.
Internal validation
Testing from material condition to cyclic performance.
Cycle testing
Repeated stroke and functional durability evaluation.
Impact testing
Structural response under defined impact conditions.
Rotation testing
Rotational function and assembly behaviour.
Pull-back testing
Back-pull and related structural verification.
Salt spray
Coating and corrosion-resistance evaluation.
Pressure testing
Gas pressure and functional force inspection.
Hardness
Rockwell hardness verification for controlled parts.
Roughness
Surface-finish measurement for sealing interfaces.
Verified configurations
EN 16955 certification at configuration level.
The following summary is based on the TÜV Rheinland certificates supplied by Samiktech. Final supply must be matched to the applicable certificate and model scope.
| Class | Type | Pressure tube | Material | Surface |
|---|---|---|---|---|
| Class 3 | SC | Ø28 × 2.0 mm | Q235B | Hard chrome |
| Class 4 | SD | Ø28 × 2.0 mm | Q235B | QPQ |
| Class 4 | SC | Ø28 × 2.5 mm | Q235B | QPQ |
| Class 4 | SC | Ø28 × 2.5 mm | Q235B | Hard chrome |
Certification documents
View the certificates behind the claims.
Each certificate is identified by its exact tube configuration. Open the original image to inspect the full scope and conditions.
Third-party reports
Independent test and factory assessment records.
Report conclusions apply only to the samples and clauses identified in each original document.
SGS · SDHL2304006246FT
SGS ANSI/BIFMA X5.1 report
Selected clauses 5, 6 and 10.3 · PASS · 2023
Open report ↗
TÜV Rheinland · MIC-ASI235464
TÜV Rheinland supplier audit
On-site review of foreign trade, R&D, production and quality-control capacity · 2023
Open audit report ↗